Movement: Automatic Mechanical
( PT5000 or NH35a)

​

1. Setting the Time

• Unscrew the crown

• Pull the crown out to position 2 (furthest out).

• The second hand will stop (hacking feature).

• Rotate the crown clockwise or counter-clockwise to set the

desired time.

• Be mindful of AM/PM when setting the time — rotate past 12

 once to check if the date changes (indicating midnight).

• Push the crown back into position 0 when done.

• The second hand will start again.

​​

2. Setting the Date

• Pull the crown out to position 1 (middle click).

• Rotate the crown counter-clockwise to change the date.

• Push the crown back in after adjusting.

​​

3. Winding the Watch

• If the watch has stopped:

• Unscrew the crown (if screw-down) and set to position 0.

• Turn the crown clockwise 20–30 times to manually wind the movement.

• You will feel resistance increase slightly — do not overwind.

• The automatic movement will continue winding with regular wrist movement.

​​

4. Using the Rotating Bezel

• Align the zero marker (triangle at 12 o’clock) with the minute hand to track elapsed time.

• Bezel turns counter-clockwise only for safety when diving.

​​

5. Water Resistance Notice

• Rated to 100M / 330FT — suitable for swimming and snorkeling.

• Do not operate the crown under water.

• Ensure the crown is fully pushed and screwed in before water exposure.

​​

6. General Care

• Avoid strong magnetic fields, they can affect accuracy.

• Service your automatic watch every 3–5 years for optimal performance.

• Clean case and bracelet with a microfiber cloth; rinse with fresh water after salt exposure.

 

 

​